Rockler Undersized Straight Router Bits - 1/4" Shank

Item #

GRP2115_1

Slightly undersized to cut tight-fitting grooves and dadoes for plywood that measures less than its stated nominal thickness.

More details

Select the quantity of the different items you need, then add them all to your cart at once!

15/64" D x 3/4" H x 1/4" Shank Rockler Undersized Straight Bit Item #90011

$19.99 Each

Qty

31/64" D x 1" H x 1/4" Shank Rockler Undersized Straight Bit Item #90110

$24.99 Each

Qty

23/32" D x 1" H x 1/4" Shank Rockler Undersized Straight Bit Item #90264

$32.99 Each

Qty

Your Package:

Total $0.00

How do you want your item?

These straight bits are slightly undersized to cut tight-fitting grooves and dadoes for plywood that is thinner than its stated nominal thickness, which applies to most plywood and veneered MDF. Typical straight bits leave an unsightly gap when used for plywood joinery. Use these bits to cut grooves, dadoes and rabbets. Of course, they can also be used for general purpose material removal or any application which requires a flat, finished bottom. The two-flute cutters give a smooth finish with a medium feed rate. Two flutes, 1/4" shank.

If a Rockler Router bit fails to perform for any reason we will replace it. No proof of purchase required. Exchange the product at your local Rockler retail store or mail it to Rockler at 4365 Willow Dr. Medina MN 55340. Name and address must be included in the package to process the exchange.

Tool Compatibility

WARNING:: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
WARNING:: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Return Policy