JessEm Mounting Brackets for Clear-Cut Stock Guides On A Shop Made Fence

Many would love to have the advantages that Clear-Cut Stock Guides have to offer but they have a shop made router table fence and no 1/4'' T-slot to mount the stock guides to. This kit is designed to mount your Clear-Cut Stock Guides to 1/2'' to 3/4'' thick stock which most shop made fences are made of. If you have a thicker fence that's not a problem, just substitute the 1/4'' - 20 X 2'' Hex head cap screws that come with the kit with longer screws available at most hardware and building center stores to accommodate the thickness of your fence. To use this kit just clamp the mounting brackets to where you desire your stock guides, then, using the holes in the mounting brackets as a guide, drill 1/4'' holes through your fence. After drilling slide the included 1/4'' - 20 X 2'' hex head cap screws through the brackets and the holes you previously drilled and mount your stock

• Allows you to mount Clear Cut Stock Guides to your Shop Made Fence
• Mounts directly to 1/2'' to 3/4'' stock
• Short and long screws included